Anodised Aluminium Windows: 10 Things You need to Know
There are so many options available when you are trying to work on the new windows. Trying out anodized aluminium windows for a change will be an excellent call to consider. However, choosing one seems tedious, especially if you are not aware of what you are getting yourself into. Learning some essential facts about anodized windows will make it easier for you to go for the right choice. So, let’s discover ten things about these windows, which were utterly unknown to you:
- For preparing the aluminum for anodizing, the surface will be cleaned and rinsed out thoroughly. Then it will be placed for an electrolytic solution like the sulfuric acid. Then a positive electric charge is applied to aluminum, while the negative charge is applied to plates. The process takes place for a long time before getting the anodized version for making windows.
- Also, some Aluminum Window manufacturers in addition to Anodizing provide additional TEXGUARD coating which is an additional clear synthetic resin paint deposited over the anodized surface and which alters the molecular structure of the surface paint and protects the surface against light, heat and water. This helps in proving high scratch resistance of 4H and low accumulation of natural dust makes it easy to clean windows with less effort and retain a new-like look for a long time.
- These anodised aluminum windows are known to have more energy-efficient panes when compared to the regular aluminum windows. So, the higher the number of horizontal and vertical breaks the window has, the less energy efficient it will be.
- It is vital to use the combination of triple and double pane windows, which will match up with the current needed energy code. Here, the manufacturers tend to work on the triple pane windows at operable windows where the aluminium frame’s thermal bridge is most remarkable.
- While dealing with the anodized aluminium windows, be sure to use one kerf wooden liner before installing to the sheetrock. It will help to minimize the current appearance of trim and will create a durable crisp finish.
- Make sure to leave 1/16″ of a gap between the interior wooden liner and the aluminum frame. It is because the thermally broken frames will experience different expansion because of temperature and humidity.
- You can aim for the double-check exterior alignments to go with the anodized aluminum windows. The lines of any other feature, door heads, siding breaks and more along with the lines that will get created once offset for flashing is factored right at the finish.
- You can also try working on the awning windows, wherever it is possible. It is mainly essential in those areas with frequent rainfall. That’s when the awning version of such windows will work our well.
- Make sure to work with the roto-styled hardware, which will work well with the anodized aluminium windows. It is mainly suitable whenever you are looking to add screens for that extra level of privacy to work with.
- In case the windows are proven to be too big, you have to install glazing to it. It is mainly because of the best weight and comfortable manageability quotient to follow. Be prepared to spend some extra bucks for the site glazing, but the upcharge will be worth the investment made for any more extensive glass expansion.
- It would help if you worked hard to align the window’s bottom at the top of interior base for that modern aesthetic you have been craving for. It is one fantastic way to offer floor to ceiling anodized aluminum windows and also to maintain continuity of interior based detailing.
These are some of the significant points for you to consider whenever you aim for the best anodized version of aluminum windows. Catch up with the professional manufacturers, who have been working in this field for a pretty long time and help you make the right choice. Ask for their advice, in case you need some extra help with it.