Thursday, April 22, 2021
spot_img

Latest Posts

How To Apply Iron On Patches For Bikers The Right Way

Bikers aren’t known for their sewing skills. In all seriousness, when shopping for patches, you want to be sure you’re distinguishing between iron biker patches and those that need to be sewn on instead. You may see the term embroidered patches, but that doesn’t mean that iron can’t be used for application. It’s the backing of these embroidered patches that matters.

If the patch has a plain fabric backing, then you can use an iron. You would either need to do some sewing or hire a sewist. To make things easier on yourself, it’s a good idea to make sure you’re populating results for patches with a glue backing. The glue backing allows for these patches to be ironed on with ease. You can place them anywhere, and there are thousands of patches to choose from.

It should be mentioned that while you can iron on patches to leather, denim, and other materials, certain delicate materials don’t work as well. There aren’t; however, many bikers wearing silk out there and the same goes for rayon and polyester. You still need to know that in case you had any plans to iron on biker patches to those types of materials.

While you can choose any spot you like on that biker jacket and other clothing garments, considering the placement of the patch is still key. You might add more patches later, and you want to be sure that you’ve picked the right spot for the current patch so that it holds. You want to leave enough room, and you want that patch to be prominently placed so that it is noticeable and makes your patches for jackets look nice.

It is best to go ahead and use an ironing board for the application process. Once you have the garment flat on the ironing board, you’re going to place the patch at the desired location. Naturally, the glue side needs to be placed onto the jacket or other clothing garments. You’re going to need to get that iron ready, too. Be sure that it is clean, filled with water, and that you’re using a hot enough setting.

The setting you put the iron on depends on the fabric. You do, however, want to use the hottest setting that you can use for the said fabric. Be sure that you’re not using steam. You’re also going to need a thin towel. This is because you’re not going to apply the iron directly to the patch. The towel needs to be placed on top of the patch. You also want to be sure you are holding the patch in place so that it ends up attached to the garment according to the placement you have selected.

When you place the iron on top of the thin towel and patch, you’re going to press firmly for about 15 seconds. After you do this, you want to give the patch some cooling time. You might notice that some of the edges need a little more work. If that’s the case, put the thin towel back over the patch and repeat what you did earlier, only this time applying the iron for only 10 seconds.

While it was mentioned that iron on biker patches leave the sewing out of the equation, you might want to reconsider. If you sew the edges, this reinforces the application of the patch. After numerous washes, a patch on a garment can start to become loose. That is why sewing just the edges is recommended. The application of an iron on patch is still simple and easy, and you don’t have to sew the entire patch onto the garment.

Once you discover the wide selection of biker patches out there, you’re going to want to buy more than you can fit on your garments. Bikers do often have quite a few patches for jackets. You can choose which ones you like, and be sure that they have a glue backing. The backing should be made clear in the product descriptions. If not, you can reach out to the company to make sure.

You’re going to get better and better at ironing on patches. It’s not difficult, but it can take a little practice. You might notice that you have to do the additional 10 seconds for the first patch because some of the edges didn’t adhere completely. You are going to be a pro at applying biker patches to garments, and you’re certainly going to get some compliments.

Find some unique patches for jackets, and be sure to scope out the best deals. Leave enough room on your clothing garments to keep adding more patches as you find them. And remember the tip about sewing the edges so that these patches last longer. Your biker jacket and other clothing garments are going to look pretty damn cool.

Latest Posts

Don't Miss