5 Best Tips for Crawlspace and Basement Insulation
What’s better than a perfectly insulated home? A perfect house with a perfect environment, warm in the winters and cool in the summers.
Yet a properly insulated house is not as simple as it seems. A significant part of it depends upon the condition of what’s beneath your building. The insulation of your house is reciprocally related to the insulation of both the crawl space and the basement. This means if you want your home to be entirely insulated, you have to ensure the insulation of the crawl space and basement too.
Here are five tips to help you achieve a perfectly insulated crawlspace and basement are discussed below. So let’s look at them and see whether they can be of your help or not.
Clear the Space As Much As Possible
If you are like those who throw every other useless thing in your basement and crawlspace, then stop. You might not know, but you are making a big mistake. Collecting unnecessary stuff in your crawlspace is the most significant barrier to insulation. So clear as much space as you can from the crawlspace and basement, throw away all the needless luggage, and provide the air in your crawl space with enough space to circulate all around.
Drain the Very Last Drop of Water
Once you have cleared all the space, your next task is to drain all the water in your crawl space. No doubt all that storage and things in the crawl space have kept the water from draining, and that’s what caused the crawl space to become damp and moist. For inducing good insulation in your crawl space, you have to make sure there is no water left.
Keep Your Crawl Space and Basement Dry
Just draining out water isn’t enough for sound insulation. You have to maintain it too. You’ll have to make sure the crawl space and basement are kept dry, and no water should be allowed to enter. So look for any loopholes from where water can enter, search if there are any plumbing leakage issues, and get it fixed right away as it is one of the significant causes of moisture in the crawlspace.
Cover the Ground with Plastic Sheet
Once all the water has been drained and dried, start covering the ground. The best material to protect your crawl space ground is the plastic sheet because plastic is a terrible conductor of heat and thus works best as an insulator. So spread the plastic sheet all over the ground with multiple folds, at least 12 inches thick. They were once covered. Tape the sheets so that they stay in place. You need to hire crawl repair expert who can encapsulate space to prevent water damage. click to find out more
Use Wall and Ceiling Insulated Products
Just covering the floor isn’t enough. If you want your house to be fully insulated, considering the walls and the ceiling is essential. To insulate your crawlspace and basement walls and ceilings by using insulating products such as radiant barriers so that outside air can’t enter the room.
