How Deep Can You Cut With a Circular Saw?
With a circular saw, you can cut several different things including lumber, metal, and even concrete. It is portable and versatile in its use. So, you can easily carry the handheld tool to your worksite so that you can perform better on the worksite. But cutting with a circular saw requires some experience to go ahead. If you don’t have any idea about how to cut something with a circular saw, don’t worry because you are already in the right place. Check the following review if you’re looking for the best rated affordable circular saw: https://toolsbros.com/best-circular-saw/
A different circular saw can cut a certain depth of anything like wood, metal or something like that. A compact circular saw can cut 1-inch depth. But if you need to cut out more depth, you need a more powerful and costly one that can help you achieve the depth. Not only that with a compact circular saw, but you can also have different cuts as well. You can make angle cuts and bevel cut of any wood or other materials.
However, in this article, I am going to tell you about the depth of the cuts in the materials and wood. At the same time, you will also learn to adjust the depth so you can continue your good work.
Cut anything you like- literally
Yes, with a circular saw, you can cut many things as I have already mentioned above. From lumber to concrete, you can cut them smoothly, precisely and straightly. It is a powerful cutting saw that will allow you to cut these things. Actually, it runs in rotary motion having a spinning blade inside mounted. Being portable and handheld, you can bring the fantastic cutting saw with you anywhere you like.
No other tools can cut your plywood, hardwood or sheets so accurately as the robust cutting saw can. For clean, straight and precise cut, you need a circular saw. If you need to cut a thin piece of concrete, you cannot perform with any other tool than a circular cutting saw.
But it has some drawbacks as well. Do you know what are they? Well. If you intend to cut a curve on a workpiece, you cannot get as good results as you are expecting. Besides, like other tools, it also produces noise which may affect your ears if you do not wear protective gear.
Let’s talk about the depth of the cuts
Depending on the size of the mounted blade of the cutting saw, you can cut as depth as it allows to cut. If you have a mounted blade which is 7 and ¼ inch, it will offer you a 2 and ½ inch of depth. Similarly, changing the blade size, you can get the variation of depths of the cuts. There are different sizes of the blade out there depending on your needs and expertise.
If you are an amateur like me, the blade size I have mentioned should be perfect for you. On the other hand, for the expert users, they can use 10 and ¼ inch or 16 and 5/16 inch blade for their professional work. As you will work mostly at home for your DIY purpose, the blade size of 2 and ½ inch and 7 and ¼ inch will do the work for you. The professional woodworkers need to cut a big piece of lumber, metal or timber so they need a bigger blade size in comparison to you.
Adjusting the depth of the blade
Considering your purpose and requirements, you can adjust the depth of the cuts from maximum to minimum with a standard circular saw. What you need to do is you have to extricate the baseplate by pulling the lock on the rear of the saw down. At that point, put that baseplate on the material, move the cutting edge upwards or downwards to change the tallness of the saw. At the point when you complete the process of adjusting, put the shoe level back to bolt the situation of the cutting edge.
But you have to make sure that you are not adjusting the blade too deep. Because it may cut the things roughly. Also, you will find some specifications you need. For cutting a 2-inch depth, you need to adjust the blade 2.25 inches to get the result.
Before cutting any depth, you should calculate it correctly so that you can have a smooth and clean cut. If you cannot adjust the blade properly, you will end up cutting the workpiece roughly.
Calculating how deep you need to cut is the primary thing you have to consider. Because you have several options, meaning you can use different sizes of blades to cut your workpiece according to your needs. Adjusting the blade properly can ensure you a clear and well-finished cut.